|
|
Ceramic R-Metal is a repair system designed for rebuilding metals damaged by erosion-corrosion. |
 |
|
Ceramic S-Metal is a repair system designed for surfacing metals attacked by erosion-corrosion. |
 |
|
Solvent for degreasing. |
 |
|
Coating system for high temperature equipment handling water and aqueous solutions. |
 |
|
Metal erosion is a continual problem in Industry and often results in costly equipment having to be replaced, such as pumps, valves and pipes. |
|
|
A two-part, rapid curing elastomeric material for repairing and rebuilding rubber components. Allows repaired component to be put back into service almost immediately. |
 |
|
Super E-Metal is a rapidly solidifying repair system for emergency and permanent bonding, repairing or rebuilding of all ferrous and non-ferrous metals. |
 |
|
Engineering grade repair system for repairing and rebuilding machinery and equipment. |
 |
|
Industrial containers are used in material handling, shipping and storage. They include bins, boxes and buckets. |
 |
|
These caps and plugs are ideal for sealing and protecting threaded and non-threaded parts such as tubing, connectors and engine openings. They also act as protection for painting, powder coating, plating and grit blasting operations. Our Technical staff can design a protective part specifically for your application if we do not have a standard part available. |
 |
These caps and plugs are ideal for sealing and protecting threaded and non-threaded parts such as tubing, connectors and engine openings.
They also act as protection for painting, powder coating, plating and grit blasting operations.
Our Technical staff can design a protective part specifically for your application if we do not have a standard part available. |
 |
|
Resistant to high pressure wear cutting and resilience is good. Application of the rollers are, conveyor rollers, mechanical drive rollers and high pressure rollers. |
 |
|
|
 |
|
|
 |
|
Washers are placed beneath a nut, an axle bearing, or a joint, to relieve friction, prevent leakage, isolate, prevent loosening, or distribute pressure |
|
Our Document Holders are made from clear impact resistant acrylic and can easily be attached to the side of a machine, or installed at a workstation.
Operators can easily view spec sheets or instructions without handling the documents, thereby preventing the paperwork from being soiled.
Horizontal and Vertical Holders are available. |
 |
|
The protection of door panels, hoods and such like is of paramount importance during the pre-assembly operations. Gentech designs and manufactures PU Locators for any application on trolleys or pallets. The PU elastomer is soft enough to protect your part, but strong enough not to be damaged by any sharp edges, and is not affected by oil. |
 |
The machined surfaces of Engine Blocks are often damaged whilst on the conveyors during machining processes.
Gentech manufactures Bump Stops that locate on either end of the Engine Block and cannot fall off. These Bump Stops and moulded from a tough Polyurethane Elastomer that is oil resistant and extremely durable. |
 |
Finned Rollers are used in the Press Shop and Body Shop for the conveyance of Sheet Metal.
The fins are pliable to prevent damaging and denting the metal sheeting during process.
Gentech manufactures these rollers using a soft Polyurethane Elastomer that is resistant to tear and is not affected by oils. |
 |
|
A urethane gasket made of a tough, flexible and durable urethane foam. |
 |
|
Many construction projects require precise alignment during assembly or just plain holding, during bending, cutting, drilling, gluing or soldering. Especially true in repeated or assembly line processes, flexible or specific holding or guiding devices can be great aids and time savers. Gentech manufactures custom made Jigs & Fixtures to customers specifications.Jigs are generally used for more temporary holding and positioning, while fixtures are considered more permanent and complex. |
|
|
Many construction projects require precise alignment during assembly or just plain holding, during bending, cutting, drilling, gluing or soldering. Especially true in repeated or assembly line processes, flexible or specific holding or guiding devices can be great aids and time savers. Gentech manufactures custom made Jigs & Fixtures to customers specifications.Jigs are generally used for more temporary holding and positioning, while fixtures are considered more permanent and complex. |
 |
|
These Lifting Bungs have been specially developed to lift engine blocks off conveyors to other work stations. There is an inner plug which is drawn into the bung to ensure safe and effective lifting of the engine. |
 |
|
Gentech manufactures various Leak Test Seals for Cylinder Heads, Sub-Assemblies and Oil Sumps by grouping together entire areas that need to be sealed simultaneously prior to pressure testing. |
 |
|
Leak Test Seals are used in the Automotive Industry to test for leaks on exhausts and pipes. |
 |
|
These Lifting Bungs have been specially developed to lift engine blocks off conveyors to other work stations. There is an inner plug which is drawn into the bung to ensure safe and effective lifting of the engine. |
|
Lifting Foot Pads are used in various sectors of the Automotive Industry.
Gentech manufactures Foot Pads from a tough, oil resistant Polyurethane Elastomer that withstands damage from the steel sections on the Under Body of a vehicle. |
 |
|
|
 |
|
These Lifting Pads are used for lifting vehicles from the Process Lines. The Pads are made from a very tough Polyurethane Elastomer and moulded to suit the shape of the Under Body, and resists cutting from sharp steel edges. |
 |
|
Machine guards on all types of industrial machines can have several functions. In some industrials processes very high speeds can be developed within the machines (e.g. milling equipment, lathes, etc.) and the machine operators have to be protected from potential objects being projected at them at high speeds from within the machine. |
 |
|
These anti-vibration mountings are simple in structure and can be widely used bringing about excellent effects in prevention of vibration, shock and noise control of machinery and equipment. |
 |
|
Mountings are important parts on a vehicle as they are specially designed to absorb vibrations. Gentech manufactures various mountings for Engine and Gear Boxes and the Elastomer hardness can be varied according to the application. |
|
|
|
 |
|
Damper pads are placed under a machine or device to dampen the vibration between the two surfaces. |
 |
Pipefix is a revolutionary new emergency repair kit made from a resin impregnated fibreglass tape, which is suitable for use in automotive, tyres and textile industries as well as mining, marine and domestic.
The one step application method ensures rapid and secure repairs to leaking pipes without the usual added fuss of measuring, messing, cleaning-up and waiting. It is chemically resistant to most acids and chemicals; however, it is not suitable for Acetic and Formic Acid, Ammonia, Cresol, Methylene Chloride or Acetone. |
 |
Pipefix is a revolutionary new emergency repair kit made from a resin impregnated fibreglass tape, which is suitable for use in automotive, tyres and textile industries as well as mining, marine and domestic.
The one step application method ensures rapid and secure repairs to leaking pipes without the usual added fuss of measuring, messing, cleaning-up and waiting. It is chemically resistant to most acids and chemicals; however, it is not suitable for Acetic and Formic Acid, Ammonia, Cresol, Methylene Chloride or Acetone. |
|
|
Many construction projects require precise alignment during assembly or just plain holding, during bending, cutting, drilling, gluing or soldering. Especially true in repeated or assembly line processes, flexible or specific holding or guiding devices can be great aids and time savers. Gentech manufactures custom made Jigs & Fixtures to customers specifications.Jigs are generally used for more temporary holding and positioning, while fixtures are considered more permanent and complex. |
|
|
Many construction projects require precise alignment during assembly or just plain holding, during bending, cutting, drilling, gluing or soldering. Especially true in repeated or assembly line processes, flexible or specific holding or guiding devices can be great aids and time savers. Gentech manufactures custom made Jigs & Fixtures to customers specifications.Jigs are generally used for more temporary holding and positioning, while fixtures are considered more permanent and complex. |
|
|
ABS sheet has high-impact strength with a textured hair-cell finish on one side. Great for appliance covers, crisper trays, instrument panels. ABS has high impact strength and is ideal for making prototypes. It can be sawed, routed, glued and heat formed. |
 |
High impact thermoplastic, machinable, thermoformable, good light transmission & dimensional stability.
Highest impact rating of all transparent thermoplastics for burglar-resistant glazing, impact shields, electronic housings., machine guards. |
 |
|
Nylon's toughness, low coefficient of friction and good abrasion resistance make it an ideal replacement for a wide variety of materials from metal to rubbers. |
 |
|
A transparent thermoplastic acrylic resin. |
 |
High mechanical strength, stiffness and hardness
Very good creep resistance
Excellent wear resistance
Very good dimensional stability
Resistance to acids
Good electrical insulating properties
Physiologically inert (suitable for food contact)
Good resistance to high energy radiation
Low and constant coefficient of friction |
 |
Polypropylene offers a combination of outstanding physical, chemical, mechanical, thermal and electrical properties not found in any other thermoplastic. It is highly resistant to corrosive materials, and has high temperature resistance and tensile strength.
Polypropylene is used widely as Acid Tank/Line-up, Battery Cases, Ducts, Rinse Tubes, Fume Hoods, Machined Parts, Metal Plating Barrels, Scrubbers and Scrub Stations. Excellent for any use with corrosive materials. |
 |
|
Strong, rigid and with good electrical insulation properties. Not recommended for use where toughness and high stress is present. Comes in a variety of grades for different applications. |
 |
|
We process specification and commercial grades of elastomer sheet jointings. |
 |
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
We process specification and commercial grades of elastomer sheet jointings. |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
Polyethylene wear strips are commonly used in conveyor systems and often have special shapes to clip into channels. |
 |
View Specifications